BHS Flexoprinting press model F-IT-1000 Age 1984

8 individual printing units suitable for front and back side printing

Max. Material width 1020 mm – Max. printing width 1000 mm

Max. unwind diameter 1200 mm

Max. rewind diameter 1200 mm

Print cylinder repeat range 300 – 800 mm

Max. speed 300 m/min. subject to print and material

Material range:

Aluminium soft 8 – 100 micron

Aluminium hard 15 – 50 micron

Paper and board 20 – 3ßß g/m²

Polyester from 12 micron

Cellophane 20 – 60 g/m²

OPP from 15 micron

PVC hard 40 – 150 micron

Laminates up to 300 g/m²

as well as other suitable applications

Installed power approx. 160 kW

Required heating capacity for all 8 units approx. 430.000 kcal/h

Required cooling approx. 1.5 to 3.0 m³/h at 18 to 20 ° degrees centigrade

Drying is thermo-oil circulation.

Thermo-oil unit not included (600.000 kcal/h required)

Accessories and special equipment:

Printing observation station for both sides of web

Register pre-setting via electronic inserts

Exhaust unit

Shafts for taking printing cylinder (8)

8 sets of ink pans with doctor rollers for fast job change

Water circulation system

After drying section

Turner bar system for reverse side printing

Web guide control system

Register control for reverse side printing

2 position synchro speed measuring and controlling

Temperatures control system for all units and after dryer

Siemens SIMATIC PLC with fault indicator for 24 stations in machine

Immediately available

All offers are subject to prior sales. Technical Data, equipment and parts are subject to final confirmation

Machine is stored in a warehouse.