GALILEO METALLISER MODEL C125A/100 – Age 1985 |
|
|
|
|
A. MAJOR FEATURESMax. speed: 500 m/min Max. width: 1250mm Max. Unwind OD : 1000mm , Max. Rewind OD : 1000mm Unwind Shaft O.D.: 3” and 6” Rewind Shaft O.D.: 3” and 6” (With 1 spare unit for each size) Evaporation boat size:i) (30x10x120)mm from Advance Ceramic (13 UNITS) ii) (26X13X120)mm from ESK (13 UNITS) Boat M.O.C.: 800-900 Aluminium wire size: 2mm (Purity 99.8%) Optical density: 2.00 to 3.00 Electrical specification: 3pH, 415volts, 50 Hz.
|
|
|
B. PROCESS MATERIAL : a) CPP 25 micron b) Polyester 12 micron / 25 micron / 23 micron c) Metallised paper 68 gsm / 70 gsm d) Bopp 20 micron / 30 micron / 40 micron e) Cellophane 30 gsm / 34 gsm f) PVC 25 micron / 50 micron / 60 micron g) Cosmophane Bopp 25 micron HSTH h) Polyester 25 micron sand blasting matt film i) Polyester 25 micron kneeding j) 48 micron MBP polyester film k) 48 micron XMLBA polyester filmNote: Information based on production run.
|
|
C. CONSTRUCTION1. CHAMBER & EVAPORATION SOURCE (1 UNIT) Model: C125A/100 Manufacturer: Officine Galileo 2. MECHANICAL PUMPS (4 UNITS) Model: KT-150C Motor power: 8 Hp Free air Displacement: 144 cfm Manufacturer: Kinney Vacuum 3. ROOTS PUMPS (6 UNITS) Manufacturer: Officine Galileo i) Model: v20rb (1 unit) Free air displacement: 600 m³/h Motor power: 2.2 kw ii) Model: v20rc (1 unit) Free air displacement: 1000 m³/h Motor power: 4.0 kw
|
iii) Model: v20rd (2 units) Free air displacement: 2400 m³/h Motor power: 5.5 kw
iv) Model: v20re (2 units) Free air displacement: 5500 Motor power: 15 kw
4. DIFFUSION PUMPS (2 UNITS) Pumping speed: 30,000 lit/sec Manufacturer: Varian
5. CARRIAGE CHILLER Model: RMN.S.180.H-5 Power: 20 Hp Manufacturer: Bondi & Salvadori
|
|
6. CRYOGENIC SYSTEM Model: PFC 1000 Manufacturer: Polycold
|
Evaporation boat Size: 13 x 26 x120mm Cavity: 1.5 x 22 x 85mm Resistivity: 800 – 900 MOC
|
|
Alu. Wire Purity: 99.8% Grade: 1080A – H8 Dia: 2.00mm |
|
|
|
|
|
|
|
